616.588.8880 Book Now

CoolSculpting Elite in Grand Rapids, Michigan

Best Plastic Surgeon 2021 - Grand Rapids Magazine Castle Connolly Top Doctor Realself Top 100 New Beauty
Best Plastic Surgeon 2021 - Grand Rapids Magazine Castle Connolly Top Doctor Realself Top 100 New Beauty Best Plastic Surgeon 2021 - Grand Rapids Magazine Castle Connolly Top Doctor Realself Top 100 New Beauty

CoolSculpting Elite — now in Grand Rapids!

The next generation of non-surgical fat reduction is now at the Bengtson Center!

Say Goodbye toSTUBBORN FAT.

CoolSculpting Elite + ZWave is scientifically proven to eliminate up to 30% of treated fat cells for good.

  • FDA-cleared to eliminate stubborn fat in 9 different areas
  • Reimagined dual applicators can now target two areas of stubborn fat at once
  • Cools 18% more surface area than the CoolSculpting Legacy
CoolSculpting Elite patient smiling

The Bengtson Center is one of the first plastic surgery centers in the country to offer CoolSculpting Elite; a revolutionary new version of CoolSculpting that allows our CoolSculpting experts to reduce stubborn pockets of fat in more areas than ever!

CoolSculpting Elite is the first CoolSculpting device to be FDA-cleared for use in nine areas of the body:

  • CHIN
  • THIGHS
  • FLANKS
  • BRA FAT
  • ABDOMEN
  • UPPER ARMS
  • BELOW THE JAWLINE
  • UNDERNEATH THE BUTTOCKS (BANANA ROLL)

CoolSculpting Elite has also been shown to be effective at tightening lax skin and removing fat in the submental areas as well.

Treat More Faster With CoolSculpting Elite

In addition to this versatility, CoolSculpting Elite also features the fully redesigned Elite Curve 240 applicator. The new applicator is built to mirror the body’s natural curves. It also features a larger cooling area and can treat up to 18% more surface area than the original CoolSculpting applicator.

If you think that sounds great — so did the folks at CoolSculpting. Because each CoolSculpting Elite machine comes with two of these applicators.

That means CoolSculpting Elite can often treat more than twice as much surface area as traditional CoolSculpting in a single session.

With two larger applicators working at once and the ability to sculpt more areas of the body, CoolSculpting Elite means you get the fantastic results of CoolSculpting in more areas faster. You can expect a more complete full-body sculpting experience after each session.

Illustration showing areas that are treatable with CoolSculpting Elite
CoolSculpting Elite patient in a pool

Elite + ZWave: The Next Wave of CoolSculpting

At the Bengtson Center, we are always looking for new ways to improve our treatments… even our newest ones!

ZWave uses acoustic wave technology to increase collagen production in the treated area and as an added benefit reduces swelling and discomfort. As the fat cells treated by CoolSculpting Elite leave the body, the extra collagen and skin tightening as a result from the acoustic radial shockwave treatment by ZWave makes sure your treated area stays smooth and toned.

By combining CoolSculpting Elite with ZWave, the cryolipolysis experts at the Bengtson Center can create a powerful combination of fat reduction and skin rejuvenation to leave you looking sleek and fabulous!

`

Every Contour Counts

Completely redesigned Elite Curve 240 applicators.

REDESIGNED C-SHAPED CUP

Expertly designed for a better fit and function to complement a patient’s natural curves.

LARGER COOLING AREA

Optimized for up to an 18% larger cooling area.

CoolSculpting Elite comes with two C-Shaped Cup applicators treating often more than twice as much surface area as traditional CoolSculpting in a single session. With two larger applicators working at once and the ability to sculpt more areas of the body, CoolSculpting Elite means you get the fantastic results of CoolSculpting in more areas faster. You can expect a more complete full-body sculpting experience after each session.

CoolSculpting applicator

Am I a Candidate for CoolSculpting Elite in Michigan?

While many people are unhappy or dissatisfied with areas of fat on their body, CoolSculpting Elite may not be for everyone. Ideal candidates should be at a stable weight and have generally good health. Our Grand Rapids CoolSculpting Elite patients will need a personal and private consultation to verify they are a candidate, so call or email the Bengtson Center today!

CoolSculpting Elite: Non-Surgical Fat Reduction in Minutes

As with CoolSculpting, CoolSculpting Elite does not require any anesthesia and is completed in-office, with your treatment taking less than an hour (although it can take longer if you have multiple areas treated).

CoolSculpting Elite works by applying dual applicators that allow our providers to sculpt two areas at the same time! CoolSculpting Elite technology uses a controlled cooling to target and kill only these fat cells. In the weeks that follow, your body naturally processes the fat and removes dead cells.

 Two CoolSculpting Elite patients on a beach
The new CoolSculpting Elite Machine
  • The machine has 2 handpieces to cut treatment times in half.
  • It cools 18% more surface area than the CoolSculpting Legacy.
  • New C-shape applicator allows for more fat reduction.

vs.

The legacy CoolSculpting Machine
  • The machine has 1 handpiece, so treatments take longer.
  • It cools less surface area.
  • U-shape applicator allowed for less fat reduction.

CoolSculpting EliteResults

CoolSculpting Elite has been scientifically proven to reduce body fat by 20-25% in a treatment area after a single session!

You will begin to see results after one month, with the final results appearing after six months. Best of all, as long as you maintain your weight, the results are permanent, with the fat completely gone from the target area.

CoolSculpting Elite + Zwave Bengtson Center Grand Rapids

Schedule Your Elite Fat Freezing Session at the Bengtson Center Today!

As they consider CoolSculpting Elite Grand Rapids patients should know that not all providers offer the same level of service. While you can receive CoolSculpting treatments from many different cosmetic providers, you will not receive the same level of results. This means that choosing the right provider will make a difference between poor and amazing results.

The Bengtson Center is proud to offer CoolSculpting Elite + ZWave. At the Bengtson Center, we make sure you receive exceptional patient care and amazing results by offering the most innovative and effective treatments in the industry. If you would like to get started on reshaping your body to reach your cosmetic goals, call or email to set up an appointment for your consultation.

Schedule Nowarrow right

CoolSculpting EliteFAQs

Is CoolSculpting painful?

Not really. You will not be under any anesthetic during the procedure, so you may experience some discomfort from the device as it massages the treated area to stimulate the disposal of the fat cells.

You may also be uncomfortable with the coolness from the applicators, which can cause numbness, but this sensation goes away as soon as the treatment is complete.

Will I need multiple treatments?

This really depends on what area(s) of your body you would like treated. If you have excessive bulges or multiple areas, then you will likely need more than one treatment. Many patients receive an average of four to six treatments, but that can be more or less. During your consultation, a customized treatment plan will be created for you by our CoolSculpting Expert Providers.

How much does CoolSculpting Elite cost?

Because the number of treatments and the treatment areas are different for every patient, the actual cost varies. In addition, CoolSculpting Elite is an elective treatment, so it is not covered by insurance providers. You can ask about payment options, including financing, during your complimentary consultation.

Important Safety Information from CoolSculpting

“These procedures are not for everyone. You should not be treated with CoolSculpting or CoolSculpting Elite if you suffer from cryoglobulinemia, cold agglutinin disease, or paroxysmal cold hemoglobinuria. Tell your doctor if you have any medical conditions including recent surgery, pre-existing hernia, and any known sensitivities or allergies. During the procedure, you may experience sensations of pulling, tugging, mild pinching, intense cold, tingling, stinging, aching, and cramping at the treatment site. These sensations subside as the area becomes numb. Following the procedure, typical side effects include temporary redness, swelling, blanching, bruising, firmness, tingling, stinging, tenderness, cramping, aching, itching, or skin sensitivity, and sensation of fullness in the back of the throat after submental or submandibular area treatment. Rare side effects may also occur. CoolSculpting and CoolSculpting Elite may cause a visible enlargement in the treated area, which may develop 2 to 5 months after treatment and requires surgical intervention for correction. Please see full Important Safety Information for CoolSculpting and CoolSculpting Elite on coolsculpting.com.”

*No guarantee is stated or implied by any photo on this site. Individual results will vary. Testimonials on this site reflect individual, real-life experiences of those who have used our products and/or services in some way or another and are strictly the views of the reviewer.

Upon removal of the CoolSculpting applicator, we utilize the ZWave acoustic wave technology to increase the breaking down of the frozen fat cells.

This additional treatment enhances the results of CoolSculpting . The ZWave treatment is part of the enhanced patient experience at the Bengtson Center and there is no additional cost to our patients when ZWave is performed immediately after your CoolSculpting treatment.

ZWave utilizes acoustic wave technology that increases the effects of CoolSculpting while decreasing swelling and discomfort. CoolSculpting is a non-surgical in office procedure and patients can expect to resume their daily lives after each CoolSculpting treatment.

2155 E Paris Ave SE
Suite 100, Grand Rapids, Michigan 49546

If you're ready to say goodbye to stubborn fat deposits, contact the Bengtson Center today to learn more about CoolSculpting Elite. Reach our Grand Rapids office by requesting your consultation online or call our office at 616.588.8880.

Fees & Financing arrow